Protection of equipment and surfaces
Protection of equipment and surfaces: offer abstract
We provide protection for all types of protective equipment and work surfaces, depending on special requirements of individual workplaces. In addition to standard products for broad consumption, here are some of the most frequently used products for the protection of equipment and surfaces. You can see our complete offer in our product catalogue. If the product you need is not included in our standard production programme, please contact us and we shall develop the product adjusted to your needs.
Covers for various medical devices and equipment
Isolation covers
Covers for hospital beds and transport wheelchairs, made of impermeable PE foil, with rubber elastic end.
Covers for various medical devices and equipment
Covers for telemetry devices
Made of antistatic, water-repellent and alcohol-repellent MEDITECT material. These covers are used by patients while wearing a telemetry device and are available in various dimensions and shapes, for all types of devices.
Covers for various medical devices and equipment
Ventilator covers
These covers serve for the protection of ventilators against dust particles and are made of VLIES material. They are available in various dimensions, for all types of devices.
Covers for various medical devices and equipment
Bronchoscope covers
Covers made of VLIES material, used for the protection of bronchopes against dust particles. They are available in various dimensions, for all types of devices.
Covers for various medical devices and equipment
Monitor covers
These covers serve for the protection of a monitor during medical procedures and are made of antistatic, water-repellent and alcohol-repellent MEDITECT material or impermeable PE foil. They are available both in non-sterile and sterile packaging.
Covers for various medical devices and equipment
Oxygen bottle covers
These are made of VLIES material and they serve as protection of oxygen bottles against dust particles. Available in various dimensions.
Covers for various medical devices and equipment
Covers for electrocoagulation machine paddle
They serve for the protection of electrocoagulation machine against liquid during surgical procedures. The covers are made of impermeable PE foil, with tie strap. They are available in various dimensions, for all types of devices.
Covers for various medical devices and equipment
Endoscopy examination table covers
These covers serve for the protection of endoscopy examination tables during various endoscopy procedures and are made of impermeable PE foil. They are available in various dimensions, for all types of examination tables.
Covers for various medical devices and equipment
Incubator drapes and covers
Covers in various sizes and shapes used to drape the incubators. Available as reusable cotton fabric covers or as disposable covers made of water-repellent and alcohol-repellent MEDITECT material that does not release particles.
Covers for various medical devices and equipment
Protective covers for central venous catheter tails
Protective covers made of water-repellent and alcohol-repellent material with adhesive tape for fastening on a catheter. They are available both in sterile and non-sterile packaging.
Covers for various medical devices and equipment
Covers for magnetic resonance imaging pillow
Pillow cover made of a white VLIES material, 24 cm in diameter. It serves as protection of the pillow during magnetic resonance imaging of the breast.
Covers for various medical devices and equipment
Cover for chest support pillow
Protective cover made of cotton fabric with a zip fastener.
Materials we use for this group of products
See all materials
VLIES 17-35 g/m2
Composition: 100% polypropylene (PP)
Available grammage: 17 g/m2, 23 g/m2, 25 g/m2, 30 g/m2, 35 g/m2
Characteristics: light and airy material, protects against dust particles that are nor harmful for human health.
Purpose: protective clothing, examination drapes and aprons and similar general purpose items.
VLIES 50-100 g/m2
Composition: 100% polypropylene (PP)
Available grammage: 50 g/m2, 60 g/m2 , 65 g/m2 , 70 g/m2, 100 g/m2
Characteristics: protects against dust particles that are nor harmful for human health.
Purpose: aprons, chef hats, bags and similar general purpose items.
VLIES AS
Composition: 100% polypropylene (PP), processed with antistatic agent
Available grammage: 20g/m2
Characteristics: light and airy antistatic material, protects against dust particles that are not harmful for human health.
Purpose: protective clothing.
SMS (MEDITECT)
Composition: 100% polypropylene (PP)
Available grammage: 35 g/m2, 45 g/m2
Characteristics: three-layer non-woven fabric, serves as a barrier to particles and bacteria. It is lint free, antistatic, water-repellent and alcohol-repellent. Tested in accordance with EN 13795 standard.
Purpose: protective clothing, surgical drapes and gauze compresses.
VIRALBARRIER
Composition: tri-laminated polypropylene spunbond with breathable film.
Characteristics: material with monolithic membrane which is vapour-open and serves as a barrier to liquids, bacteria and viruses. The material has been tested in accordance with EN 13795 standard, using test methods ASTM F1670 and ASTM F1671.
Purpose: manufacture of protective clothing for crisis situations: surgical gowns, overalls, protective caps, high-ankle shoe covers, isolation drapes etc.
AIRLAID
Composition: cellulose + synthetic fibres.
Characteristics: soft, highly absorbent, equally firm in dry and in wet condition. Hygienically tested.
Purpose: manaufacture of hygiene products for washing and wiping.
MALIVLIES
Composition: polyester + viscose
Characteristics: soft and airy like textile, firm, non-irritating.
Purpose: manufacture of hygiene products used in patient care (bathing).
MEDILAM AIRLAID
Composition: cellulose + synthetic fibres + LDPE foil
Characteristics: two-layer, very soft and impermeable material. Upper layer is highly absorbent and lower layer ensures impermeability.
Purpose: manufacture of impermeable, absorbent pads, impermeable pillowcases, etc.
AIRLAID PE
Composition: cellulose + synthetic fibres + PE foil
Characteristics: soft, highly absorbent, equally firm in dry and in wet condition. Hygienically tested.
Purpose: manufacture of impermeable, absorbent pads, pillowcases, etc.
PE foil
Composition: 100% polyethylene (PE)
Characteristics: transparent impermeable foil; 40, 70 and 120 µm.
Purpose: manufacture of general purpose items, X-ray covers and covers for other medical devices, operating room lamps etc.
ELBE foil
Composition: PVC – P
Characteristics: impermeable foil, thickness: 0,12 cm.
Purpose: protective aprons and instrument pouches.
MEDILAM SBPP
Composition: PP + synthetic fibres + antistatic PE film
Characteristics: two-layer laminated material. Tested for work with cytostatics in accordance with EN 13795 standard.
Purpose: manufacture of protective clothing for work with cytostatics and surgical drapes.
SPUNLACE
Composition: cellulose + viscose + polyester + synthetic fibres
Characteristics: great absorption capacity for all types of liquids (water, oil, ink, solvents, …). Resistant to wear and tear both for dry wiping and washing. It is lint free.
Purpose: manufacture of wiping cloths for the equipment and work surfaces in rooms with controlled conditions.
BAMBOO SPUNLACE
Composition: bamboo viscose
Characteristics: opaque and airy material, resistant to bacteria. It is lint free. Skin friendly.
Purpose: manufacture of disposable pajamas, wipes and blankets.
MEDIKA PUR
Composition: polyester + polyurethane
Characteristics: water-repellent fabric, treated for fungi, mould and bacteria. It can be washed, sterilized and dried without changing its properties. It can be washed at 95°C and sterilised at 134°C.
Purpose: protective covers for pillows and mattresses.
RUBBERISED FABRIC
Composition: it does not contain ingredients harmful for human health. No cadmium, lead or azo dyes.
Characteristics: firm and resistant to body fluids.
Purpose: reusable protective impermeable bed covers.
FOUR STOP 1600
Composition: apertured transparent LDPE 25 µm + blue AIRLAID 55 g/m2 + white AIRLAID 65 g/m2 + highly adherent transparent film
Characteristics: multi-layer base with special film which provides an effect of dryness – NO REWETTING. Highly absorbent inner layer and anti-slip film.
Purpose: suitable for flat surfaces and floors in hospitals (for example beneath receptacles used for washing or instrument tables).
MICROJET (microfiber)
Composition: 100% microfiber (50% polyester + 50% polyamide)
Characteristics: high level of cleansing power (even without the use of chemicals), low rate of particle release, antibacterial treatment. High firmness.
Purpose: manufacture of cleansing cloths for industry and households.
FOUR STOP 5000
Composition: apertured transparent LDPE 25 µm + blue AIRLAID 55 g/m2 + white AIRLAID 320 g/m2 + highly adherent transparent film
Characteristics: multi-layer base with special film which provides an effect of dryness – NO REWETTING. Highly absorbent inner layer and anti-slip film.
Purpose: suitable for flat surfaces and floors in hospitals (for example beneath receptacles used for washing or instrument tables).
Send us your inquiries
Feel free to send us any inquiries as to the availability and prices of products, agreement on cooperation or making of a special product. We will answer you as soon as possible.
Download product catalogue
See the complete offer of our products in our product catalogue or contact us for an order adjusted to your needs and requirements.
