Composition: 100% polypropylene (PP), processed with antistatic agent
Available grammage: 20g/m2
Characteristics: light and airy antistatic material, protects against dust particles that are not harmful for human health.
Purpose: protective clothing.
Composition: SB PP AS 20g/m2 + 60/80 g wadding + SB PP AS 20g/m2
Characteristics: light and airy wadded antistatic material, used to warm the patients.
Purpose: blankets and warming jackets.
Composition: polyester + cellulose
Characteristics: water-repellent fabric, resistant to bacteria. Tested in accordance with EN 13795 standard.
Purpose: manufacture of surgical gowns and warming jackets.
Composition: apertured polyolefin film + 2 layers of cellulose + polyolefin film
Characteristics: four-layer laminated material, highly absorbent, with high rate and speed of absorption and with dry effect – NO REWETTING. Tested in accordance with EN 13795 standard.
Purpose: manufacture of surgical drapes, pads and reinforcements on surgical drapes.
Composition: polyester + viscose
Characteristics: soft and airy like textile, firm, non-irritating.
Purpose: manufacture of hygiene products used in patient care (bathing).
Composition: cellulose + synthetic fibres.
Characteristics: soft, highly absorbent, equally firm in dry and in wet condition. Hygienically tested.
Purpose: manaufacture of hygiene products for washing and wiping.
Composition: cellulose + synthetic fibres + PE foil
Characteristics: soft, highly absorbent, equally firm in dry and in wet condition. Hygienically tested.
Purpose: manufacture of impermeable, absorbent pads, pillowcases, etc.
Composition: cellulose + synthetic fibres + LDPE foil
Characteristics: two-layer, very soft and impermeable material. Upper layer is highly absorbent and lower layer ensures impermeability.
Purpose: manufacture of impermeable, absorbent pads, impermeable pillowcases, etc.
Composition: 100% polypropylene (PP)
Available grammage: 17 g/m2, 23 g/m2, 25 g/m2, 30 g/m2, 35 g/m2
Characteristics: light and airy material, protects against dust particles that are nor harmful for human health.
Purpose: protective clothing, examination drapes and aprons and similar general purpose items.
Composition: 100% polypropylene (PP)
Available grammage: 50 g/m2, 60 g/m2 , 65 g/m2 , 70 g/m2, 100 g/m2
Characteristics: protects against dust particles that are nor harmful for human health.
Purpose: aprons, chef hats, bags and similar general purpose items.
Composition: 100% polypropylene (PP)
Available grammage: 35 g/m2, 45 g/m2
Characteristics: three-layer non-woven fabric, serves as a barrier to particles and bacteria. It is lint free, antistatic, water-repellent and alcohol-repellent. Tested in accordance with EN 13795 standard.
Purpose: protective clothing, surgical drapes and gauze compresses.
Composition: cellulose + viscose + polyester + synthetic fibres
Characteristics: great absorption capacity for all types of liquids (water, oil, ink, solvents, …). Resistant to wear and tear both for dry wiping and washing. It is lint free.
Purpose: manufacture of wiping cloths for the equipment and work surfaces in rooms with controlled conditions.
Composition: bamboo viscose
Characteristics: opaque and airy material, resistant to bacteria. It is lint free. Skin friendly.
Purpose: manufacture of disposable pajamas, wipes and blankets.
Composition: PP + synthetic fibres + antistatic PE film
Characteristics: two-layer laminated material. Tested for work with cytostatics in accordance with EN 13795 standard.
Purpose: manufacture of protective clothing for work with cytostatics and surgical drapes.
Composition: viscose + LDPE foil
Characteristics: two-layer, very soft and impermeable material with highly absorbent upper layer. Tested in accordance with EN 13795 standard.
Purpose: manufacture of surgical drapes, isolation pads, impermeable pillowcases etc.
Composition: polypropylene (PP) + antistatic PE film + viscose
Characteristics: three-layer, laminated, impermeable material with highly absorbent upper layer. Tested in accordance with EN 13795 standard.
Purpose: manufacture of surgical drapes.
Composition: viscose + AIRLAID + LDPE foil
Characteristics: three-layer, very soft, impermeable material with highly absorbent upper layer. Tested in accordance with EN 13795 standard.
Purpose: manufacture of reinforcements on surgical drapes.
Composition: Kraton ® polymer
Characteristics: characteristics in accordance with EN 13795 standard.
Purpose: surgical drapes with elastic aperture, covers for the extremities.
Composition: tri-laminated polypropylene spunbond with breathable film.
Characteristics: material with monolithic membrane which is vapour-open and serves as a barrier to liquids, bacteria and viruses. The material has been tested in accordance with EN 13795 standard, using test methods ASTM F1670 and ASTM F1671.
Purpose: manufacture of protective clothing for crisis situations: surgical gowns, overalls, protective caps, high-ankle shoe covers, isolation drapes etc.
Composition: 100% polyethylene (PE)
Characteristics: transparent impermeable foil; 40, 70 and 120 µm.
Purpose: manufacture of general purpose items, X-ray covers and covers for other medical devices, operating room lamps etc.
Composition: PVC – P
Characteristics: impermeable foil, thickness: 0,12 cm.
Purpose: protective aprons and instrument pouches.
Composition: apertured transparent LDPE 25 µm + blue AIRLAID 55 g/m2 + white AIRLAID 65 g/m2 + highly adherent transparent film
Characteristics: multi-layer base with special film which provides an effect of dryness – NO REWETTING. Highly absorbent inner layer and anti-slip film.
Purpose: suitable for flat surfaces and floors in hospitals (for example beneath receptacles used for washing or instrument tables).
Composition: apertured transparent LDPE 25 µm + blue AIRLAID 55 g/m2 + white AIRLAID 320 g/m2 + highly adherent transparent film
Characteristics: multi-layer base with special film which provides an effect of dryness – NO REWETTING. Highly absorbent inner layer and anti-slip film.
Purpose: suitable for flat surfaces and floors in hospitals (for example beneath receptacles used for washing or instrument tables).
Composition: polyester + polyurethane
Characteristics: water-repellent fabric, treated for fungi, mould and bacteria. It can be washed, sterilized and dried without changing its properties. It can be washed at 95°C and sterilised at 134°C.
Purpose: protective covers for pillows and mattresses.
Composition: it does not contain ingredients harmful for human health. No cadmium, lead or azo dyes.
Characteristics: firm and resistant to body fluids.
Purpose: reusable protective impermeable bed covers.
Composition: 100% microfiber (50% polyester + 50% polyamide)
Characteristics: high level of cleansing power (even without the use of chemicals), low rate of particle release, antibacterial treatment. High firmness.
Purpose: manufacture of cleansing cloths for industry and households.
To make this website run properly and to improve your experience, we use cookies. For more detailed information, please check our Cookie Policy.
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.